6
Using your Sunbeam Mixmaster benchtop mixer (continued)
3. When mixing is complete, turn the speed
control dial to the OFF position and unplug
the cord from the power outlet.
4. Press in ‘head tilting’ button and ease the
Mixmaster benchtop mixer head back until
the mixer head is locked into the tilt back
position (See Figures 1 and 2 on page 4).
5. To remove the particular attachments
(either beaters or dough hooks), place
fingers loosely around the attachments and
hold down the ‘eject button’ see Figure 8.
Figure 8
The mixing bowls rotate by means of the
plastic button on the tip of the beater making
contact with the bowl and the mixture
passing through the beaters.
Note: To prevent overmixing the rotation
of the bowl may slow down and in some
instances stop, depending on the consistency
of the mixture. It is unnecessary for the bowl
to rotate continuously throughout mixing.
Eject
Button
Rotation of Mixing Bowls
To Next Page
Loading...
