English-10
English-11
caring For Your Mixer
cLeaning Your Mixer
To clean the mixer, turn off and unplug from outlet, wipe the
mixer head, stand and turntable with a damp cloth, then dry.
DO NOT IMMERSE THE STAND MIXER IN WATER. Avoid
the use of abrasive cleaners, as they may damage the finish of
the mixer. Wash the beaters and bowls in hot, soapy water after
each use. Rinse thoroughly and dry. Beaters and bowls may also
be washed in an automatic dishwasher.
storing Your Mixer
Store the mixer in a dry location, such as on a countertop or table
top, or in a closet or cupboard. Insert the beaters into the proper
sockets. Place the dough hooks and other attachments in the
mixing bowl. Store the bowl(s) on the turntable. Wind the electric
cord into a coil, then secure it with a twist fastener.
Maintenance
The motor of your stand mixer has been carefully lubricated at
the factory and does not require any additional lubricant. Other
than the recommended cleaning, no further user maintenance
should be necessary.
For servicing or repairs please contact Consumer Services for
assistance. (1-800-458-8407 in the U.S. or 1-800-667-8623 in
Canada) or www.sunbeam.ca
heLPFuL hints
• Whenmixingliquids,especiallyhotliquid,makesmall
quantities at a time to reduce spillage.
• Ingredientsshouldbeaddedtothemixingbowlastheyare
specified in the recipe.
• Usethemixingspeedthatisrecommendedintherecipe.Use
the speed control dial of the mixer to help you find the correct
speed to use.
• Iftimesarespecifiedintherecipe,usethem!BECAREFUL
NOT TO OVERMIX. Overmixing can cause the mixture to
become very tough.
• Shouldanobject,suchasaspatula,fallintothebowlwhile
the mixer is operating, turn the mixer OFF immediately, then,
remove the object.
• Foreasierclean-upremovebeatersandrinseimmediatelywith
warm water.
• Mixerisdesignedtobeoff-centerwhenthelargebowlisused
for best performance.
• Mixerturntablewillcomeshippedplacedinthecorrecthole
for use with the large mixing bowl which is included.
FPSBSM2101-2104_13EFM2.indd 11-12 6/17/13 11:05 AM