English-7
PreParing the stand Mixer For use
Before preparing the mixer for use, be sure the speed control dial
is in the OFF position and the electric cord is unplugged. Be sure
to wash bowls and attachments before initial use.
raising and Lowering the Mixing head
Press the tilt release button, located at the top of the neck of
the Stand Mixer. While the button is depressed, hold the handle
and ease the head of the Stand Mixer back. The head will lock
into this tilt position (See Figure 2). To lower the mixing head,
press the tilt release button. While the button is depressed,
hold the handle and ease the head of the Stand Mixer down. A
“click” sound will indicate when the mixer head has locked into
position. (See Figure 1)
instaLLing the attachMents
Beaters, Dough Hooks and Whisks (selected models only)
Select the pair of attachments best suited for your mixing job.
(See Mixing Guide for recommendations). Take the attachment
that has a green colored band around the top and insert into
the mixer head, indicated by the matching green dot. When
attachments are inserted properly the one with the green band
should be nearest the side of the bowl.
N
OTE: Be sure both attachments click firmly in place. You may
need to twist the beater attachment slightly to engage it in
position prior to pushing it in place.
Kneading
O
Folding
ht
Tilt Release
HER ITA GE S ERI ES
®
Figure 1
Features oF Your stand Mixer (cont.)
Tilt Release
Kneading
Off
Folding
ht
HER ITA GE S ERI ES
®
Figure 2
English-6
FPSBSM2101-2104_13EFM2.indd 7-8 6/17/13 11:05 AM
To Next Page
Loading...
