Sunbeam MultiMincer FG5600 - Page 9

9
Using your Sunbeam MultiMincer
®
(continued)
Fitting and using the Kebbe attachments
1. Placethemincerbody,facingyouona
level,drysurface.
2. Fitthemincingscrewinsidethechute.
3. Fitthekebbeshaper.
4. Fitthekebbeconeovertheshaper.
5. Securethekebbeattachmentswith
thefasteningdial.Looselysecurewith
fasteningdial–donotusespanneruntil
chuteislockedintomincerbody.See
figure5.
6. Alignchuteintothemincerbodyusing
arrowsasaguide.Pressandholdthe
lock/unlockbuttontotwistandlockinto
place.Usethespannertotightenthe
fasteningdialtoensureallelementsare
securelyinplace.
7. Placethefeedertrayontopofthechute.
SeeFig6.
8. Plugthepowercordintoa230-240VAC
poweroutletandturnthepower‘ON’.
9. Switchonmincer.
10.Usingthepusher,pushthekebbemixture
intothechute.
11.Cutkebbeintodesiredlengths.
Tip: Forfullkebberecipeandsuggestionssee
page20.
Figure 6
Figure 5