Sunbeam PU8000 - Using Your Espresso Machine; Initial Setup and Preparation

8
Using your espresso machine
When using the machine for the first time, you
must carry out these steps:
1. Rinse components. See figure 1.
2. Remove the lid and extract the machine
reservoir. See figure 2.
3. Carefully rinse the tank and lid with water.
See figure 3.
4. Carefully rinse the supplied water filters
and filter holders. See figure 4.
5. Reposition the tank in the machine.
See figure 5.
6. Fill with water, pour still mineral water or
good quality potable drinking water into
water tank. See figure 6.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6