Sunbeam T20A - Tools

*
THE TOOLS REFERRED TO IN THIS BULLETIN ARE:
Reference No. Tool No.
Tool 1 T30235
Tool 2 Standard
Description
Assembly Block, felt lined.
Assembly fixture to replace
Center Shell (Make according
to
diagram)
8M
,7i'
Tool No. 2
1.
Use
3/4"
lumber
2. Line entire inside
with
1/4"
felt. Allow overlap
to be
tacked down on outside.
*
Tools
with
T
number
-
order from
the factory.
Standard tools
-
make or
purchase locally.
SUNBEAM CORPORATION
5 600 W. ROOSEVELT RD.
CHICAGO 50, ILLINOIS