Suncast Tremont - Page 22

Shed Assembly/Roof ( continued)
Pull down each lower corner of roof from outside. From
inside shed, attach tabs on right front corner ( I) & rear
corner ( G) to roof panel with four screws ( X).
29
Repeat Steps 27-28
for remaining roof panel.
Secure roof support bracket ( N) to roof using three
screws ( X).
Push down the roof from outside. From inside shed,
secure roof panels together along ridge of roof using
three rubber washers ( AA) and three sealing screws ( Z).
Note: For clarity, illustration is shown with front header
removed.
22