SunComm SC-385 - Configuring Static IP Parameters; Setting DHCP Client Mode

-6-
Address Default : 192.168.0.254
7 Check Primary
DNS Server
#125#
IVR will announce the current
setting in the Primary DNS
field.
Default : 192.168.0.1
8 Check Firmware
Version
#128#
IVR will announce the version
of the firmware running
9 Set as DHCP
client
#111#
The system will change to
DHCP
Client type
10 Set Static IP
Address
#112xxx*xxx*xxx
*xxx#
DHCP will be disabled and
system will change to the
Static IP type.
Enter IP address using
numbers on the telephone key
pad. Use the * (star) key when
entering a decimal point.
11 Set Network Mask #113xxx*xxx*xxx
*xxx#
Must set Static IP first.
Enter value using numbers on
the telephone key pad. Use
the * (star) key when entering
a decimal point.
12 Set Gateway IP
Address
#114xxx*xxx*xxx
*xxx#
Must set Static IP first.
Enter IP address using
numbers on the telephone key
pad. Use the * (star) key
when entering a decimal
point.
13 Set Primary DNS
Server
#115xxx*xxx*xxx
*xxx#
Must set Static IP first.
Enter IP address using
numbers on the telephone key
pad. Use the * (star) key
when entering a decimal
point.