SunComm SC-385 User Manual

SC-385
GSM VoIP Gateway
2 channels
User Manual

SunComm SC-385 Specifications

General

Brand	SunComm
Model	SC-385
Category	Gateway
Language	English

Summary

Cabling and Initial Setup

IP Network Configuration

Configuring Static IP Parameters

Setting DHCP Client Mode

Web Interface Configuration

Routing Rules (Mobile to LAN)

Mobile to LAN Speed Dial Settings

Routing Rules (LAN to Mobile)

Mobile Status and Settings

Network Configuration and Status

Network Interface Status

WAN Network Configuration

Configure TCP/IP, PPPoE, and Bridge mode settings for the WAN connection.

LAN Network Configuration

Configure TCP/IP settings and the DHCP server for the local network.

SNTP Time Synchronization Settings

SIP Protocol Configuration

Service Domain Configuration

Set up SIP service domains, including account details and server information.

SIP and RTP Port Configuration

Configure SIP and RTP port numbers for mobile interfaces.

Codec, Signaling, and QoS Settings

NAT Traversal Settings

STUN Function Enable/Disable

STUN Server IP Address Configuration

System Authentication Settings

Saving Configuration Changes

System Update and Restore

System Reboot Function

Asterisk Integration Setup

Typical Usage Scenario

SC-385 Configuration for Asterisk

Steps for configuring the SC-385 before integrating with Asterisk.

Asterisk LAN Settings Configuration

Configure LAN settings (IP, Mask, Gateway) for Asterisk integration.

Asterisk LAN to Mobile Routing

Configure the LAN to Mobile routing table for Asterisk calls.

Asterisk Mobile to LAN Routing

Define authorized mobile numbers for calls from mobile to Asterisk.

Asterisk Service Domain Configuration

Asterisk Codec Settings

sip.conf Configuration for Asterisk

Details the configuration parameters for the sip.conf file for the SC-385.

extensions.conf Configuration for Asterisk

Defines dial plan rules and call handling in extensions.conf for the SC-385.