Page 27
680 SERIES
9.2 Activate Pumps
The JETS 1 button activates the jets pump 1. The rst press
activates in low speed, the second press activates high
speed, and the third press shuts the pump off. The JETS 2
button (if equipped) activates jets pump 2 which only
operates in high speed. When manually activated, both
pumps automatically turn off in 20 minutes.
9.3 SunGlow
™
Light Operation (Denali and Tacoma Models)
The spa light offers 6 constant color variations and a unique random
mode for enhanced spa enjoyment. Press the Light button once to turn
the spa light on in Random mode, then repeatedly press the button to
turn the light off or to select one of 6 constant colors as illustrated below.
You must press the LIGHT button within 5 seconds between each “off”
or “color” selection to prevent it from resetting. Pressing the button
after 5 seconds restarts the sequence in Random mode. This mode
automatically changes the light color every 8 to 20 seconds.
Note: Any time the spa light is manually turned on, it will automatically
turn off after approximately 1 hour. If you desire more light at this time,
simply turn the light back on.
1
2
Random
Off
Blue
OFF
OFF
OFF
OFF
Green
Orange
OFF
OFF
Red
Violet
Teal
To Next Page