Sundown Audio SALT-4 - Full Range Digital Amplifiers Overview; Features of Full Range Digital Amps; Full Range Digital Specifications

( 6.85 W x 2.66 H ) Inches *
( 8.67 W x 2.80 H ) Inches
Crossover Multipliers - X1 / X10
Clipping Indicator
4 Way Protection Circuit ( Thermal, Voltage
Speaker short and DC Offset )
Temperature display and Clipping Indicator.
Optional Wired Remote Control with Voltage &
Full Range Digital Amplifiers
High Efficiency Digital Multi-Channel Design
Stable - 2ohm Stereo / 4ohm Bridged
12 dB/Octave - Variable Subsonic Filter
12 dB/Octave - Variable High Pass Filter
12 dB/Octave - Variable Low Pass Filter
All features are subject to change in the continuing effort to improve the products without notice.
RATED POWER OUTPUT
(Tested Voltage 14.4Volts)
-RMS Power - 4ohm Mono :
-RMS Power - 2ohm Stereo :
-RMS Power - 4ohm Stereo :
Subsonic Filter :
High Pass Filter :
High Pass Filter Multiplier :
Low Pass Filter :
Low Pass Filter :
Frequency Response (+/-1dB) :
Input Sensitivity (+/-5%) :
Signal Noise Ratio :
T.H.D - 4ohms :
Efficiency - 4ohms :
Recommended Fuse Rating :
Unit Length ( Inches ) :
75% <
50 (500) Hz - 500 Hz (5 KHZ )
X1 / X10
50 (500) Hz - 500 Hz (5 KHZ )
X1 / X10
10 Hz - 25 KHz
6 - 0.2 Volts
105 dB
< 0.1%
10 Hz - 500 Hz
FULL RANGE DIGITAL FEATURES
FULL RANGE DIGITAL SPECIFICATIONS
700W x 2
325W x 2
200W x 2
60A
7.88*
SALT-200.2
100A
11.82*
SALT-400.2
1300W x 1
650W x 2
400W x 2
120A
11.82*
SALT-200.4
700W x 2
325W x 4
200W x 4
150A
13.39
SALT-300.4
1000W x 2
500W x 4
300W x 4
300A
14.96
SALT-500.4
1400W x 2
700W x 4
500W x 4
2