29
Σχετική υγρασία
Εύρος θερμοκρασιών
>XX+XX< Περιγραφή υλικού
7. Έγκριση
Οι μάσκες ημίσειας κάλυψης προσώπου SR100
και SR90-3 εγκρίνονται σύμφωνα με το πρότυπο
EN140:1998.
Το πιστοποιητικό έγκρισης τύπου ΕΚ 2016/425
για τον Κανονισμό ΜΑΠ έχει εκδοθεί από το
Διακοινωμένο Όργανο 2849. Για τη διεύθυνση,
ανατρέξτε στην πίσω πλευρά των οδηγιών
χρήσης.
Η δήλωση συμμόρφωσης για την ΕΕ διατίθεται
στη διεύθυνση www.srsafety.com
The inhaled air flows through a filter and
inhalation membrane into the mask. The exhaled
air is discharged from the face piece through
two exhalation valves.
The half masks are used either as filtering
devices in combination with filters from the
Sundström range, or in combination with the
SR307 compressed air attachment which then
serves as a breathing apparatus with continuous
flow for connection to a compressed air supply.
A wide range of accessories are available. See
2.2 Accessories/Spare parts.
1.2 Applications
The Sundström half masks provide respiratory
protection against airborne pollutants, such
as particles, micro-organisms, biochemical
substances, gases/vapours and combinations
of these substances to a user.
1.3 Warnings/Limitations
Note that there can be national differences in
the regulations for use of respiratory protective
equipment.
The equipment must not be used:
• If you cannot make the mask a tight fit during
the fitting test.
• If the pollutants are unknown or lack ad-
equate warning properties.
• In environments that are Immediately Dan-
gerous to Life and Health (IDLH).
• In environments where the ambient air is
oxygen-enriched air or does not have a
normal oxygen content.
• If you find that breathing is difficult.
• If you experience dizziness, nausea or other
discomfort.
• If you smell or taste the pollutants.
• If you have any hair growth between the
skin and facepiece sealing surface such as
stubble, beard growth, beard, moustache, or
sideburns which cross the respirator surface.
• If scars or other physical characteristics may
interfere with a proper fit of the respirator.
Caution must be taken when using the equip-
ment in explosive atmospheres.
2. Parts
2.1 Delivery check
Check that the equipment is complete in ac-
cordance with the packing list, and undamaged.
Packing list
• Half mask
• Pre-filter holder
• Cleaning tissue
• ID-tag
• Pre-filter
• Storage bag
• Instruction of use
2.2 Accessories / Spare parts
Fig. 1
Item Part No. Ordering No.
Half mask SR100 S/M H01-2112
Half mask SR100 M/L H01-2012
Half mask SR100 L/XL H01-2812
Half mask SR90-3 S/M H01-2712
Half mask SR90-3 M/L H01-2612
1. Mask body -
2. Filter attachment -
3. Head harness SR363, single strap R01-2001
3. Head harness SR362, cradle strap R01-2002
4. Membrane seat -
5. Exhalation membrane -
6. Protective cap -
7. Inhalation membrane -
8. Pre-filter holder R01-0605
9. Pre-filter SR221 H02-0312
10. Particle filter P3 R, SR510 H02-1312
11. Gas filter A1, SR217 H02-2512
11. Gas filter A2, SR218 H02-2112
11. Gas filter AX, SR298 H02-2412
11. Gas filter ABE1, SR315 H02-3212
11. Gas filter ABE2, SR294 H02-3312
11. Gas filter K1, SR316 H02-4212
11. Gas filter K2, SR295 H02-4312
11. Gas filter ABEK1, SR297 H02-5312
Combined filter filter
ABEK1-Hg-P3 R, SR299-2 H02-6512
Membrane kit SR369, fig. 4 R01-2004
Inhalation membrane -
Exhalation membranes -
Protective caps -
Service kit, fig. 5 R01-2005
Head harness -
Membrane kit -
Pre-filter holder -
Protective hood SR64, fig. 6 H09-0301
Protective hood SR345, fig. 7 H09-1012
Protective hood SR346, fig. 8 H09-1112
Storage box SR230, fig. 9 H09-3012
Storage bag SR339, fig. 10 H09-0112
Voice amplifier SR324, fig. 11 T01-1217
Test adapter SR328, fig. 12 T01-1202
ID-tag SR368 R09-0101
Cleaning tissues SR5226,
box of 50, fig. 13 H09-0401
To Next Page
Loading...
Need help?
General
