40
22. Rubber belt SR 504 T06-0104
23. Leather belt SR 503 T06-0103
24. Harness SR 552 T0 6-0116
25. Fan unit SR 500, bare R 0 6 - 0110
26. Gasket to fan unit R06-0107
27. Pre-filter holder SR 512 R06-0106
28. Pre-filter SR 221 H02-0312
29. Particle filter P3 R, SR 510 H0 2-1312
30. Filter adapter SR 511 R06-0105
31. Pre-filter holder SR 5153 R01-0604
32. Particle filter P3 R, SR 710 H02-1512
33. Gas filter A2, SR 518 H02-7012
34. Gas filter ABE1, SR 515 H02-7112
35. Gas filter A1BE2K1, SR 597 H02-7212
36. Combined filter A1BE2K1-Hg-P3 R,
SR 599 H02-7312
37. Splash cover SR 514 T0 6-0114
38. Plug kit R06-0703
6.Key to symbols
Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC Certification Services Ltd.
Insulation class 2
Pressure and temperature compensated
7. Worn-out products
The fan unit contains a circuit board with electronic
components, a small proportion of which comprise toxic
substances. The battery contains no mercury, cadmium
or lead, and is therefore not regarded as environmentally
harmful waste. The plastic parts are marked with the
material code. For proper handling, collection and recy-
cling, worn-out fans should be handed in to a recycling
centre. Contact the local authorities for information on
the location of your nearest recycling centre.
Recycle in accordance with local regulations. Proper re-
cycling of the product contributes to efficient use of the
natural resources.
8. Approvals
• The SR 500 in combination with face shield SR 540,
welding shield SR 590, helmet with visor SR 580, hel-
met with visor SR 580 with welding shield SR 584,
hoods SR 520, SR 530, SR 561 or SR 562 is appro-
ved in accordance with EN 12941, class TH3.
• The SR 500 in combination with full face mask SR
200 or half mask SR 900 is approved in accordance
with EN 12942, class TM3.
• The SR 500 conforms to the requirements of EN
61000-6-3 Emission and EN 61000-6-2 Immunity,
which makes the fan conform to EMC Directive
2004/108/EC..
• The electronics ingress protection is approved in IP
classification IP67 in accordance with IEC/EN 60529.
The EC type approval certificate has been issued by No-
tified Body No. 0194. For address, see back-cover.
Australian StandardsMark
The fan SR 500 is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) (“SAI Global”).
To Next Page
Loading...
