Sunex Tools 5000A - Troubleshooting and Warranty Information; Common Issues and Solutions

5000A 10 rev. 11/04/13
Trouble Shooting Guide
TROUBLE PROBABLE CAUSE REMEDY
Noisy operation A) Incorrect belt tension A) Adjust tension
B) Dry spindle B) Remove spindle/quill assembly - lubricate
C) Loose pulley C) Tighten Pulley
D) Loose belt D) Adjust belt tension
E) Bad bearing E) Replace bearing
Excessive drill A) Loose chuck A) Tighten by pressing chuck down against table
wobble B) Worn spindle shaft or bearing B) Replace spindle shaft or bearing
C) Bad chuck C) Replace chuck
Motor won't start A) Power supply A) Check power cord
B) Motor connection B) Check motor con nec tion
C) Switch connections C) Check switch con nec tions
D) Motor windings burned D) Replace motor
E) Bad switch E) Replace switch
Drill binds in A) Excessive pressure on feed handle A) Ap ply less pressure
workpiece B) Loose belt B) Check belt tension
C) Loose drill C) Tighten drill with key
D) Speed too fast D) Change speed
Drill burns or A) Incorrect speed A) Refer to speed chart
smokes B) Chips are not discharging B) Clean drill
C) Dull drill C) Check sharpness & taper
D) Needs lubrication D) Use lubrication while drilling
E) Feed pressure wrong E) Apply less pressure
Table difficult to A) Needs lubrication A) Lubricate with light oil
raise B) Bent rack B) Straighten Rack
C) Table lock tightened C) Loosen clamp
SUNEXINTERNATIONAL,INC.WARRANTSTOITSCUSTOMERSTHATTHECOMPANY’SSUNEXTOOLS®BRANDED
PRODUCTSAREFREEFROMDEFECTSINWORKMANSHIPANDMATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools® branded products which fail to give satisfactory service due to defective workmanship or materials,
based upon the terms and conditions of the following described warranty plans attributed to that specific product.
This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any part or unit which proves to be
defective in material or workmanship.
Otherimportantwarrantyinformation
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or replacement made by
anyone other than Sunex Tools or its authorized warranty service centers. The foregoing obligation is Sunex Tools’ sole liability under this or any implied warranty
and under no circumstances shall we be liable for any incidental or consequential damages.
NOTE:
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Return equipment or parts to Sunex Tools, transportation prepaid. Be certain to include your name and address, evidence
of the purchase date, and description of the suspected defect. If you have any questions about warranty service, please write to Sunex Tools. This warranty gives you
specific legal rights and you may also have other rights which vary from state to state.
Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the product is still covered by a warranty plan.
SHIPPINGADDRESS:
Sunex Tools
315 Hawkins Rd.
Travelers Rest, South Carolina 29690
MAILINGADDRESS:
Sunex Tools
P.O. Box 1233
Travelers Rest, South Carolina 29690
Limited Warranty