SX232B 1 Rev. 08/29/07
SX232B
1/4" Dr.
ANGLE
DIE GrINDEr
Max. Free Speed.................20,000 RPM
Collet Size (In.) ................................1/4"
Air Inlet ....................................1/4" NPT
Rec. Hose Size ..........................3/8" I.D.
Rec. Air Pressure .......................90 PSIG
Avg. Air Consumption...................4 CFM
Length ............................................. 6.2"
Sound Level .............................93.6 dBA
Shipping Weight ....................... 1.11 lbs.
SPECIFICATIONS
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
Operating Instructions • Warning Information • Parts Breakdown
• MAXIMUM RPM OF 20,000
• MAX AIR PRESSURE:
90 PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
To Next Page
Need help?
General
