Sunex Tools SX232B User Manual

SX232B: Parts Breakdown & Operating Manual
Instructions • Warning Information • Parts Break down
SX232B
1/4" DRIVE ANGLE
DIE GRINDER
Max. Free Speed ....................... 20,000 RPM
Collet Size ................................................ 1/4"
Average Air Consumption ...................4 CFM
Air Inlet .............................................1/4" NPT
Air Supply Hose Size ........................ 3/8" I.D.
Length .................................................... 6.38"
Weight .....................................................1 LB
Sound Level .................................... 93.6 dBA
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WARNING
RATED RPM OF ACCESSORY USED
MUST EXCEED THE MAXIMUM TOOL
RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
WHEN OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
WARNING
RPMRPMRPM

Sunex Tools SX232B Specifications

General

Brand	Sunex Tools
Model	SX232B
Category	Grinder
Language	English

Summary

Specifications

Safety Warnings and Precautions

Chemical Exposure Hazards

Details hazards from dust containing chemicals like lead, silica, arsenic, and chromium.

General Safety Adherence

Emphasizes reading manual, understanding instructions, and following all safety guidelines to prevent injury.

Safe Operating Practices

Covers tool handling, accessory use, rotation direction, and avoiding specific hazards.

Health and Environmental Precautions

Addresses hearing, vibration, chemical exposure (Prop 65), and tool maintenance requirements.

Parts Breakdown

Operating Information

Air Supply Requirements

Details recommended air pressure, air quality, hose diameter, and hookup procedure.

Troubleshooting Common Issues

Addresses causes of loss of power or erratic action and basic corrective steps.

Lubrication and Maintenance

Provides daily lubrication steps and safety warning regarding oil discharge.

Tool Operation Guidelines

Covers accessory mounting, safe operation, and specific warnings for use.