Sunex Tools SX245K User Manual

SX245K 1 Rev. 09/11/03
SX245K
Pencil Die
Grinder Set
SPECIFICATIONS
Free Speed . . . . . . . .58,000 RPM
Collet Size (In.) . . . . . . . . . .1/8"
Air Inlet (NPT) . . . . . . . . . . .1/4"
Hose Size (I.D.) . . . . . . . . .3/16"
Air Pressure . . . . . . . . . . .90 PSI
Air Consumption (CFM) . . . .5.3
Sound Level (dBA) . . . . . . . . .72
Length (In.) . . . . . . . . . . .5-1/4
Shipping Wt. (Lbs.) . . . . . . . . .2
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Operating Instructions • Warning Information • Parts Breakdown
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
• MAXIMUM RPM OF 58,000
• MAX AIR PRESSURE: 90
PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM

Sunex Tools SX245K Specifications

General

Brand	Sunex Tools
Model	SX245K
Category	Grinder
Language	English

Summary

Dust Hazard Warnings

Operating Safety Precautions

Key safety guidelines for operating the tool, including RPM, air pressure, and personal protective equipment.

General Safety Warnings and Precautions

Tool Operation and Maintenance Safety

Covers safe operation practices, handling air pressure, avoiding vibration, and proper maintenance procedures.

Parts Breakdown

Operating Instructions

Air Supply Requirements

Details recommended air pressure, air quality, hose size, and connection types for optimal tool performance.

Tool Operation Guidelines

Instructions on applying force, gripping the spindle, and avoiding hazards during grinding operations.

Lubrication and Maintenance

Guidance on daily lubrication, potential causes of power loss, and troubleshooting erratic tool action.