Sunex Tools SX264 User Manual

SX264 1 Rev. 6/16/20
Operating Instructions • Warning Information • Parts Break down
SX264
1/4" MINI RIGHT ANGLE
DIE GRINDER
© Copyright 2020, Sunex Tools
®
Collet Size ................................................ 1/4"
Max. Free Speed ........................20,000 RPM
Weight ................................................ 1.03 LB
Length ...................................................... 5.5"
Average Air Consumption ...................4 CFM
Air Inlet ............................................. 1/4" NPT
Air Supply Hose Size ........................ 3/8" I.D.
Sound Level .....................................93.2 dBA
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals
are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other
masonry products
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust
masks that are specially designed to filter out
microscopic particles.
WARNING
WARNING
RATED RPM OF ACCESSORY
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE
PROTECTION
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR HAND
PROTECTION
ALWAYS WEAR FACE
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
RPMRPMRPM

Sunex Tools SX264 Specifications

General

Type	Angle Grinder
Power Source	Pneumatic
Arbor Size	5/8 inches
Average Air Consumption	4 CFM
Required Air Pressure	90 PSI
Free Speed	11, 000 RPM
Air Inlet	1/4 in NPT
Wheel Diameter	4-1/2 inches

Summary

Product Specifications

Health and Safety Warnings

Dust-Related Health Hazards

Warns about dust containing chemicals known to cause cancer, birth defects, or reproductive harm.

Essential Operational Safety

Lists critical safety measures like rated RPM, eye, hearing, and hand protection.

Comprehensive Safety Instructions

Consequences of Ignoring Warnings

Stresses that failure to follow instructions can result in serious injury, fire, or explosion.

Safe Tool Usage Practices

Covers reading the manual, handling, accessories, and maintenance for safe operation.

California Proposition 65 Chemical Warning

Alerts to exposure to chemicals like nickel known to cause cancer and reproductive harm.

Parts Breakdown

Operation and Maintenance Guidelines

Air Supply and Setup Requirements

Details recommended air pressure, clean air, hose diameter, and fittings for optimal performance.

Troubleshooting Common Issues

Addresses loss of power or erratic action due to air supply or tool-related problems.

Lubrication and Daily Maintenance

Explains the procedure for lubricating the air motor daily with air tool oil.

Operating Procedures

Covers general operation, accessory mounting, and safety during use.

Limited Warranty Information