Sunfire SubRosa XT Series - Introduction

User's Manual
Introduction
Thank you for purchasing this Sunre
XT Series SubRosa™ Subwoofer. We
hope you enjoy it and the music it makes
as much as we have enjoyed creating it
for you.
The breakthrough features of the
subwoofer include:
• I-BEAM™ anti-shake mechanism to
reduce wall vibration
• Dual ten-inch, High Back-emf woof-
ers with neodymium magnets for
low-prole
• 2700W Tracking Downconverter™
companion amplier
• Fully automatic room equalization
The SubRosa subwoofer is a nely
tuned system and should only be
used with the Sunre SRA-2700EQ
companion amplier. Using any other am-
plier will offer inferior performance and
may void your warranty.
About this installation guide
This guide contains instructions for
installing the SubRosa in-wall cabinet into
various locations, and installing the front
bafe assembly, and the grille assembly.
For information regarding the opera-
tion of the system, please refer to the
user's guide that comes with the
companion SRA-2700EQ amplier.
Tools and experience
required
The cabinet should only be
installed by qualied and experi-
enced professional installers.
General construction tools are required
for framing wood studs, gluing and
screwing the cabinet in place, and apply-
ing sheetrock.
Introduction
System components
The required components for a func-
tioning SubRosa in-wall system are:
• SRS-210W-C
In-wall cabinet and hardware.
• SRS-210W-B
Front bafe containing two woofers,
the I-BEAM™ anti-shake device,
and a crossover network.
• SRS-210W-G
Grille assembly
• SRA-2700EQ
Amplier and its room equalization
measurement microphone
4