SunFounder PiDog Kit, Release 1.0
Note: If the automatic connection cannot find the device, please click Scan to search again, or click
Manual to input PiDog’s IP manually.
4. Run the Controller.
• When the “Connected Successfully” prompt appears, tap the button in the upper right corner.
• The picture taken by the camera will appear on the APP, and now you can control your PiDog with these
widgets.
Here are the functions of the widgets.
• A: Detect the obstacle distance, that is, the reading of the ultrasonic module.
• C: Turn on/off face detection.
• D: Control PiDog’s head tilt angle (tilt head).
2.2. Funny Project 73
To Next Page
Loading...
