EasyManua.ls Logo

Sungrow Logger1000A - WEB Interface; Access and Login

Sungrow Logger1000A
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
7 WEB Interface
7.1 Running Requirements
Item Parameter
Browser
IE11 or later, Chrome65 or later, and Safari11 or
later
Min. resolution 1024*768
7.2 Login Steps
The Web interfaces provided in this document are for reference only, and the ac-
tual ones may differ.
Users of different types have different permissions. In the following, description is
given by using the O&M permission as an example.
Users can log into the Logger1000 via the Ethernet or WLAN (recommended).
7.2.1 WLAN Login
Step 1 Open the wireless network settings of the PC, search for the wireless network "SG-
A1234567890" of the Logger1000, and connect the PC to the wireless network of the Log-
ger1000 (without password).
"SG-A1234567890" is just used as an example. For actual wireless network, refer
to the S/N on the label attached to the front side of the Logger1000.
Step 2 Enter the IP address 11.11.11.1 of the Logger1000 in the PC address bar to enter the general
user login interface.
Step 3 Click the button Login in the upper right corner, enter the default password "pw1111", and
click Login, to enter the O&M user interface.
- - End

Table of Contents

Other manuals for Sungrow Logger1000A

Related product manuals