12
• The storage environment should be well ventilated, dry, and without any accumulated
water.
• Ambient temperature: -40℃ to +70℃; relative humidity: 0~95%, no condensation.
• Take precautions to protect the device against damage due to harsh environment such
as shock cooling, shock heating, and collision.
• Regularly inspect the Logger1000, usually at least once a week. Check the packing case
for intactness and replace it immediately when necessary.
• Unpack and check the Logger1000 in powered on state if it has been stored more than
half a year.
• The Logger1000 must be packed during storage!
• Never store the Logger1000 outdoors or in an environment directly exposed to
sunlight!
• No tilting or stacking!
After long-time storage, thoroughly check the Logger1000 and ensure it is undam-
aged before installation. If necessary, install the Logger1000 only after it has been
tested by qualified personnel.
3 Unpacking and Storage User Manual
To Next Page
Loading...
Need help?
General
