Need help?Do you have a question about the Sungrow SG10KTL-M and is the answer not in the manual?
General| Rated Output Power | 10000 W |
|---|---|
| Max. DC Voltage | 1100 V |
| Maximum DC Input Voltage | 1100 V |
| Start Voltage | 200 V |
| Number of MPPTs | 2 |
| Rated AC Power | 10000 W |
| Maximum AC Output Power | 10000 W |
| Power Factor at Rated Power | > 0.99 |
| THDi | < 3% |
| DC Switch | Integrated |
| Protection Degree | IP65 |
| Protection Rating | IP65 |
| Input Voltage Range | 200 V - 1000 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Rated AC Voltage | 230 V |
| Rated AC Output Voltage | 230 V |
| AC Voltage Range | 180 V - 280 V |
| Rated Grid Frequency | 50/60 Hz |
| AC Output Frequency | 50/60 Hz |
| Protection Class | Class I |
| Operating Temperature Range | -25 °C ~ +60 °C |
| Communication | RS485 |
Provides guidelines on connecting the inverter into the PV power system and how to operate it.
Mentions additional information available at www.sungrowpower.com.
Identifies technical personnel and inverter owners responsible for installation and operation.
Instructions on reading the manual and information on reserved rights.
Explains how important instructions are highlighted within the manual.
Safety notices and warnings to be considered before starting installation.
Safety warnings and precautions specific to the mechanical installation phase.
Safety warnings and precautions for electrical connection procedures.
Safety warnings and precautions to follow during inverter operation.
Safety guidelines and precautions for performing maintenance and service.
General safety instructions, warning labels, and regulatory compliance.
Describes the inverter's purpose as a PV grid-connected component and its intended application.
Details the physical appearance and main components of the inverter.
Provides the physical dimensions of the inverter in millimeters.
Explains the function and states of the LED indicator panel.
Describes the function and operation of the DC switch for safely disconnecting DC current.
Provides an overview of the inverter's technical aspects and functions.
Presents the main circuit diagram of the inverter.
Details the inverter's functions including inversion, data storage, and protection.
Explains output derating due to ambient temperature, grid voltage, and altitude.
A table detailing the sequence of installation steps and their references.
Procedures for inspecting the inverter for damage upon receiving.
Information on how to identify the inverter using its nameplate.
Lists all items included in the inverter package.
Guidelines for proper storage of the inverter when not immediately installed.
Criteria for selecting an optimal and safe installation site.
Instructions for safely moving the inverter to its installation location.
Lists the necessary tools required for the mechanical installation.
General steps and considerations for mounting the inverter.
Specific procedures for installing the inverter's backplate to a metal frame.
Specific procedures for installing the inverter's backplate to a concrete wall.
Identifies and describes the electrical connection terminals on the inverter.
Details the requirements and procedures for connecting AC side cables.
Instructions and safety warnings for connecting the inverter to PV arrays.
Explains how to configure the two PV input areas and their specifications.
Provides steps and requirements for connecting DC cables from PV strings.
Details grounding procedures, system overview, and PE terminal usage.
Instructions for establishing RS485 communication.
Steps for crimping and connecting Ethernet cables to the RJ45 port.
Information regarding PLC communication compatibility and connection.
Lists essential checks and items to inspect before starting the commissioning process.
Step-by-step guide for starting up the inverter for the first time.
Procedures for safely disconnecting the inverter from DC and AC power sources.
Instructions for dismantling the inverter, referencing installation steps in reverse.
Guidance on responsible disposal of the inverter to prevent environmental pollution.
Lists common fault codes, their descriptions, and recommended troubleshooting steps.
Procedures for system cleaning and regular maintenance checks.
Provides contact information for service hotlines, email, and required details for support.
Overview of the Sun Access APP and its capabilities for inverter management.
Steps for downloading and installing the Sun Access APP on mobile devices.
Lists the required operating system and recommended device models for the APP.
Detailed steps for downloading and installing the Sun Access APP.
Instructions on how to log into the Sun Access APP and select user type.
Description of the APP's homepage displaying power, yields, and alarm information.
Details on how to view inverter input, output, grid, and environment information.
Interface for viewing historical data including alarm, power yields, and event records.
How to check and view fault alarm records within a specified time period.
Instructions to view various energy records like power curve and histograms.
How to check and view event records within a specified time period.
Access to advanced APP features like parameters, logs, and firmware upgrades.
Instructions on how to start or stop the inverter using the APP.
How to check and set system parameters such as date, time, and equipment info.
Details on adjusting operational settings like power parameters and derating.
Settings for Low Voltage Ride Through (LVRT) parameters.
Configuration for power derating based on grid frequency thresholds.
Settings for ISO protection function and resistance to ground.
How to check and set protection parameters based on country grid codes.
Configuration settings for device address, baud rate, and stop bits.
Access to advanced settings like photovoltaic panel testing and overvoltage protection.
Instructions on how to check and download log files from the inverter.
Steps for checking and performing firmware upgrades on the inverter.
Information about the Sun Access APP version and operating system.
Detailed technical specifications for the inverter's input and output sides.
Legal disclaimer regarding product usage, installation, and software conditions.
Information about Sungrow Power Supply Co., Ltd. as a manufacturer.
Company contact details including website, email, address, and telephone numbers.
To Next Page
