48
When the wiring is completed, check for the wiring correctness and then seal the
gap between cables and inlet and outlet holes with fireproof/waterproof materials
such as fireproof mud to prevent foreign matter or moisture from entering and af-
fecting the long-term normal operation of the inverter.
6.8.2 Locking Cabinet Door
Step 1 Release the fixing doors of the inverter unit cabinet and the power distribution cabinet. Unfix
in reverse of the fixing method，refer to "6.3.2 Open the Product Door".
It is forbidden to close the door forcibly when the door is fixed.
Step 2 Lock the cabinet door and pull out the key.
Electric shock hazard!
Be sure to lock the cabinet door. Otherwise, non-professionals may be exposed to
the running machine, and it may cause casualties.
- - End
6 Electrical Connection System Manual
To Next Page
Loading...
Need help?
General