4 Mechanical Mounting User Manual
CAUTION
Improper handling may cause personal injury!
• Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such as
anti-impact shoes and gloves.
• Attention must be paid to the center of gravity of the inverter to avoid tilting during
handling.
• Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
• Move the inverter by holding the handles on it. Do not move the inverter by holding
the terminals.
4.5 Installing Mounting-bracket
Inverter is installed on the wall and bracket by means of mounting bracket.
The expansion plug set shown below is recommended for the installation.
26
To Next Page
Loading...
Need help?
General
