1 Safety Instructions User Manual
8
There is a risk of inverter damage if it is improperly serviced.
Use only accessories and spare parts approved by the inverter
manufacturer. Never modify the inverter or the components of the
inverter. Otherwise it may void any or all warranty rights from Sungrow.
There is a risk of inverter damage due to electrostatic discharge!
The printed circuit boards contain components sensitive to
electrostatic discharge. Wear a grounding wrist band when handling
the boards. Avoid unnecessary touch with the boards during
replacement.
Others
The selected country settings can be changed by qualified personnel
only!
Unauthorized modification of country settings is prohibited.
Alternation of the country settings may cause a breach to the
type-certificate marking.
All safety instructions, warning labels and nameplate on the inverter
body:
Must be clearly visible;
Must not be removed, covered and pasted.
These regulations should also be followed:
The regulations related to the electricity fed into grid;
The safety instructions related to PV arrays;
The safety instructions related to other electrical device.
To Next Page
Loading...
Need help?
General