To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG40CX and is the answer not in the manual?
General| Model | SG40CX |
|---|---|
| Rated Output Power | 40 kW |
| Max. Input Voltage | 1100 V |
| Start Voltage | 200 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Number of MPPTs | 4 |
| Max. Input Current per MPPT | 26 A |
| Number of DC Inputs per MPPT | 2 |
| Max. AC Apparent Power | 44 kVA |
| Max. Output Current | 63 A |
| Rated AC Voltage | 400 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion | <3% |
| Power Factor at Rated Power | 1 |
| Adjustable Power Factor Range | 0.8 leading - 0.8 lagging |
| European Efficiency | 98.4% |
| DC Switch | Yes |
| Protection Class (According to IEC 62103) | Class I |
| Cooling Method | Smart forced air cooling |
| Protection Degree | IP66 |
| Grid Frequency Range | 45 Hz - 55 Hz / 55 Hz - 65 Hz |
| Communication | RS485 |
| Operating Temperature Range | -25°C to +60°C |
Critical safety measures to follow during the physical installation process.
Safety measures to ensure safe operation of the inverter.
Safety warnings and procedures for performing maintenance tasks.
Details the core conversion, data storage, and communication functions.
Essential safety precautions for the mechanical installation process.
Criteria for selecting an appropriate installation site and environmental conditions.
Crucial safety warnings and procedures for all electrical connections.
Detailed procedures for connecting AC and DC power cables.
Checklist of items before starting the inverter's commissioning process.
Step-by-step guide for the initial startup and commissioning of the inverter.
Procedures for updating firmware and configuring grounding detection.
Safe procedures for disconnecting power and physically removing the inverter.
Guide to identifying fault codes and corrective measures for inverter issues.
