88
figure 7-19 Q(U) Curve
figure 7-20 Q(P) Curve
7.8.4 Communication Parameters
Tap “Settings→Communication Parameters” to enter the corresponding screen, as shown
in the following figure. The device address ranges from 1 to 246.
figure 7-21 Communication Parameters
7.8.5 Firmware Update
To avoid download failure due to poor on-site network signal, it is recommended to download
the firmware package to the mobile device in advance.
Perform firmware update only during high irradiance conditions in order to prevent equip-
ment failure.
Step 1 Enable the "Mobile data" of the mobile device.
Step 2 Open the App, enter the account and password on the login interface. Tap Login to enter the
home interface.
Step 3 Tap “More→Firmware Download” to enter corresponding interface on which you can view
the device list.
7 iSolarCloud App User Manual
To Next Page
Loading...
Need help?
General