Sungrow SH5K+ - AC Coupled System Configuration; Enable Existing System Settings; Set Total Export Limit

!
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
service@sungrowpower.com.au | www.sungrowpower.com.au
SH5K+_GD_Quick Commissioning Guide_201803 Page 2 of 3
When system is AC coupled and existing PV system us used to charge battery, the
following must be enabled in the settings menu.
Enter
Scroll down
Enter
Enter
Scroll down
Enter Existing Sys > Existing Sys Rated - P
O Disable 00000W
O Enable Total Export Limit
05000W
Rate - P:Exisiting inverter power rating
Prot. Param
"Existing System"
Off-Grid Settings
Bat Usage Time
Forced charge
Load control
Comm Param
Password - 111
Reactive Power
Active Power
Zero Export
Battery Type
Main Menu
Run Info
ON/OFF
Settings