sunjoe SPX-FC34 - User Manual

R
SPX-FC34 ASSEMBLY QUICK GUIDE
FOR USE WITH
SPX3000/SPX4000/SPX9000 SERIES:
1.If not already done, detach your spray wand from your trigger gun.
2.Attach the transfer adapter to your trigger gun.
3.Take the foam cannon and align the two tabs with the transfer adapter.
4.Once aligned, insert the tip of the locking collar on the foam cannon into the transfer adapter, twist counter clockwise to lock into place.
5.Adjust the foam cannon if needed. After any adjustment is made, use the locking collar to lock the attachment into place. and twist to lock.
SPX2000/SPX6000/SXP7000 Series
Trigger gun
Locking collar
SPX3000/SPX4000/SPX9000 Series
Trigger gun Transfer adapter Locking collar
SPX200/SPX1000 Series
Trigger gun
Locking collarMiddle wand

Summary

SPX3000;SPX4000;SPX9000 Series Assembly Guide

Step-by-step Assembly for SPX3000 Series

Instructions cover detaching the spray wand, attaching the transfer adapter, and securing the foam cannon.

SPX2000;SPX6000;SXP7000 Series Assembly Guide

Step-by-step Assembly for SPX2000 Series

Guide for attaching the foam cannon to trigger guns for SPX2000, SPX6000, SXP7000 models.

SPX200;SPX1000 Series Assembly Guide

Step-by-step Assembly for SPX200 Series

Instructions for connecting the foam cannon to the middle wand for SPX200 and SPX1000 models.

SPX-FC34 Usage Notes and Detergent Recommendations

Adjusting Soap Release and Spray Pattern

Guidance on using the soap knob and front part of the SPX-FC34 for soap release and spray adjustment.

Approved Detergents and Chemical Warnings

Specifies recommended detergents and prohibits the use of household, industrial, or corrosive chemicals.

sunjoe SPX-FC34 Specifications