To Next PageTo Next PageWhy is my sunjoe SWJ698E having poor cutting performance?
If your Sunjoe Chainsaw demonstrates poor cutting performance, the saw chain could be blunt, needing sharpening or replacement. Also, incorrect chain tension could be the cause, so check and adjust it. Lastly, verify the saw chain orientation to ensure it's fitted correctly.
Why is my sunjoe Chainsaw chain not rotating?
If the motor of your Sunjoe Chainsaw runs but the chain isn't rotating, it could be due to chain tension being too tight, which requires adjustment. Alternatively, the guide bar and chain may be damaged, necessitating replacement with identical parts.
What to do if sunjoe SWJ698E Chainsaw chain jumps off guide bar?
If the chain of your Sunjoe Chainsaw jumps off the guide bar, check the chain tension and adjust if necessary.
What to do if my sunjoe Chainsaw motor does not start?
If the motor of your Sunjoe Chainsaw doesn't start, several factors could be at play. First, ensure the cord is securely connected to a power source. Next, verify that the safety lock button is fully depressed before engaging the trigger switch. Also, check that the extension cord is fully connected to the tool. Inspect the extension cord and power cable for any damage, and repair or replace them if necessary. Finally, worn motor brushes could be the culprit, requiring replacement.
Why is my sunjoe SWJ698E bar and chain running hot and smoking?
If your Sunjoe Chainsaw's bar and chain are running hot and smoking, it could be due to a few reasons. The chain tension might be too tight, requiring adjustment. Another cause could be an empty oil tank, so fill it with chain oil. Lastly, the chain might be installed backwards; reverse it so that the cutters face the right direction.
Why does my sunjoe SWJ698E Chainsaw chain work with difficulty?
If your Sunjoe Chainsaw chain works with difficulty, it may be due to incorrect chain tension. Check the chain tension and adjust it accordingly.
All operators must read and understand all instructions before using the chain saw.
Details the saw's intended purpose and examples of hazardous improper uses.
Covers guards, work area, conditions, bystanders, tool usage, apparel, and protection.
Covers tool usage, accessories, maintenance checks, unattended operation, and storage.
Ensures GFCI protection and proper use of outdoor-rated extension cords for electrical safety.
Details polarized plug usage, correct outlet, and cord restraint for preventing disconnection.
Explains the concept of double insulation, its servicing, and part replacement requirements.
Details service by qualified personnel and emphasizes using identical replacement parts.
Covers body part clearance, grip, PPE, operating location, footing, tension, and lubrication.
Explains kickback causes and provides precautions to avoid it, like firm grip and proper stance.
Details techniques to avoid kickback, including grip, overreaching, bar/chain choice, and sharpening.
Guidelines for wearing suitable clothes, protecting the tool from moisture, and proper storage conditions.
Explains the meaning of various safety symbols used on the product for user understanding.
Illustrates and labels the various parts and controls of the electric chain saw.
Provides key technical data including voltage, power, speed, and dimensions.
Lists items found in the carton and instructions for checking for damage or missing parts.
Step-by-step guide on how to correctly install the guide bar and chain on the saw.
Instructions for removing and replacing the guide bar and chain on the electric chain saw.
Essential checks on screws, chain tension, grips, switches, and oil level before operating.
Details how to adjust chain tension for cold and warm conditions to ensure safe operation.
Explains the importance of using proper bar and chain oil for lubrication and maintenance.
Steps for starting the chain saw, including adding oil and connecting power.
Tips for safe operation, including reading instructions, proper stance, and avoiding hazards.
Covers vibration effects, chain tension checks, oil delivery, and proper cutting stance.
Provides guidance on basic cutting procedures for small logs and trees for new users.
Detailed instructions and safety warnings for felling trees, including notching and back cuts.
Techniques for removing branches from a fallen tree and cutting logs into lengths.
Instructions on safe log bucking, including using the spiked bumper and cutting on slopes.
Steps to take after finishing work, including cleaning and storing the chain saw.
Guidelines for proper maintenance, parts replacement, and motor cooling for longevity and safety.
Explains how to check and adjust chain tension for cold and warm conditions.
Provides instructions and conditions for sharpening the chain for optimal performance.
Instructions for maintaining the guide bar, including turning, cleaning, and when to replace it.
Provides contact details for service, maintenance, and obtaining replacement parts.
Instructions on how to clean and store the chain saw safely after use.
Lists common faults, possible causes, and remedies for operational problems with the chain saw.
Lists authorized replacement parts and accessories for the electric chain saw.
Details the product warranty, general conditions, exclusions, and how to obtain service.
Provides contact methods for customer support, service, and inquiries about the product.
All operators must read and understand all instructions before using the chain saw.
Details the saw's intended purpose and examples of hazardous improper uses.
Covers guards, work area, conditions, bystanders, tool usage, apparel, and protection.
Covers tool usage, accessories, maintenance checks, unattended operation, and storage.
Ensures GFCI protection and proper use of outdoor-rated extension cords for electrical safety.
Details polarized plug usage, correct outlet, and cord restraint for preventing disconnection.
Explains the concept of double insulation, its servicing, and part replacement requirements.
Details service by qualified personnel and emphasizes using identical replacement parts.
Covers body part clearance, grip, PPE, operating location, footing, tension, and lubrication.
Explains kickback causes and provides precautions to avoid it, like firm grip and proper stance.
Details techniques to avoid kickback, including grip, overreaching, bar/chain choice, and sharpening.
Guidelines for wearing suitable clothes, protecting the tool from moisture, and proper storage conditions.
Explains the meaning of various safety symbols used on the product for user understanding.
Illustrates and labels the various parts and controls of the electric chain saw.
Provides key technical data including voltage, power, speed, and dimensions.
Lists items found in the carton and instructions for checking for damage or missing parts.
Step-by-step guide on how to correctly install the guide bar and chain on the saw.
Instructions for removing and replacing the guide bar and chain on the electric chain saw.
Essential checks on screws, chain tension, grips, switches, and oil level before operating.
Details how to adjust chain tension for cold and warm conditions to ensure safe operation.
Explains the importance of using proper bar and chain oil for lubrication and maintenance.
Steps for starting the chain saw, including adding oil and connecting power.
Tips for safe operation, including reading instructions, proper stance, and avoiding hazards.
Covers vibration effects, chain tension checks, oil delivery, and proper cutting stance.
Provides guidance on basic cutting procedures for small logs and trees for new users.
Detailed instructions and safety warnings for felling trees, including notching and back cuts.
Techniques for removing branches from a fallen tree and cutting logs into lengths.
Instructions on safe log bucking, including using the spiked bumper and cutting on slopes.
Steps to take after finishing work, including cleaning and storing the chain saw.
Guidelines for proper maintenance, parts replacement, and motor cooling for longevity and safety.
Explains how to check and adjust chain tension for cold and warm conditions.
Provides instructions and conditions for sharpening the chain for optimal performance.
Instructions for maintaining the guide bar, including turning, cleaning, and when to replace it.
Provides contact details for service, maintenance, and obtaining replacement parts.
Instructions on how to clean and store the chain saw safely after use.
Lists common faults, possible causes, and remedies for operational problems with the chain saw.
Lists authorized replacement parts and accessories for the electric chain saw.
Details the product warranty, general conditions, exclusions, and how to obtain service.
Provides contact methods for customer support, service, and inquiries about the product.
General| Type | Electric Chainsaw |
|---|---|
| Bar Length | 14 inches |
| Weight | 6.5 lbs |
| Chain Speed | Chain speed of 28.5 ft/s |
| Automatic Oiler | Yes |
| Power Source | Electric |
| Voltage | 120V |
| Chain Type | Low kickback |
