To Next PageTo Next PageWhy won't my Sun Joe Chainsaw start?
If the motor of your Sun Joe Chainsaw doesn't start when you switch it on, it could be due to the following reasons: either the battery is not inserted correctly, so make sure that the battery is inserted correctly; or the battery is exhausted, so check the charge status and recharge the battery.
What to do if my Sun Joe Chainsaw motor stops during operation?
If the motor of your Sun Joe Chainsaw stops during operation, there are a couple of potential causes: either the battery is not inserted correctly, so ensure it is properly inserted; or the battery is exhausted, so check the charge status and recharge the battery.
How to improve cutting performance of my Sun Joe Chainsaw?
If your Sun Joe Chainsaw has poor cutting performance, it could be due to a few reasons: the saw chain may be blunt, so sharpen or replace it; the chain tension might be off, so check it; or the saw chain may be fitted incorrectly, so double-check its installation.
Why does my Sun Joe Chainsaw have reduced battery power?
If you're experiencing reduced battery power reserve with your Sun Joe Chainsaw, it could be due to difficult operating conditions that absorb more current. To optimize use, plan your cuts in advance, avoid applying excessive pressure when cutting, keep the chain sharpened, ensure proper chain tension, and don't allow the battery to discharge completely.
What to do if my Sun Joe Chainsaw battery charger isn't working?
If the battery charger for your Sun Joe Chainsaw isn't charging the battery, consider these possibilities: the contacts may be dirty, so clean them; there may be no power supply to the battery charger, so verify that the electric plug is properly inserted into the outlet and that the socket receives power; or the battery charger may be defective, so replace it with an original spare part.
Why does the chain keep jumping off my Sun Joe Chainsaw?
If the chain keeps jumping off the guide bar of your Sun Joe Chainsaw, the chain tension may be off. Check the chain tension.
Why is the chain on my Sun Joe Chainsaw hard to move?
If the chain on your Sun Joe Chainsaw is hard to move, the chain tension might be the issue. Check the chain tension.
Why is the chain on my Sun Joe Chainsaw getting hot?
If the chain on your Sun Joe Chainsaw is getting hot, it could be due to issues with the chain lubricant. Check the oil level and chain lubrication.
Crucial instructions operators must read before using the equipment.
Understanding the machine's functions and its designated purpose.
Lists hazardous uses and their consequences.
Guidelines for safe work areas, electrical precautions, and operator safety.
Proper techniques for using, maintaining, and storing the power tool.
Information on obtaining professional service for the tool.
Essential safety measures to prevent injury during chain saw use.
Explains kickback and provides precautions to prevent it.
Safety measures for using batteries and chargers to prevent hazards.
Guidelines for battery handling, storage, and optimal performance.
Details on charger connection, usage, and safe charging practices.
How to protect the tool, battery, and charger from environmental factors.
Visual guide to the parts and controls of the cordless chain saw.
Lists items in the box and initial inspection procedures.
Step-by-step instructions for mounting the guide bar and chain.
Essential checks to perform before starting the chain saw.
Steps to adjust and check the chain tension for optimal performance.
How to test the chain brake to ensure it operates correctly.
Guidance on selecting and using chain lubricant for effective operation.
How to check the battery charge level using the indicator lights.
Step-by-step instructions on how to charge the battery pack.
Guidance on when to charge the lithium-ion battery pack.
Instructions for starting the cordless chain saw.
Procedures for safely stopping the chain saw.
General advice for safe and responsible operation of the chain saw.
Procedures for checking chain tension and oil delivery during operation.
Guides for felling trees, limbing branches, and bucking logs.
Steps to take after finishing work with the chain saw.
How to ensure proper motor cooling and check chain tension.
Procedures for checking the chain brake and tightening nuts/screws.
Detailed steps for sharpening the chain saw chain.
Steps for cleaning, greasing, and replacing the guide bar.
How to check and replace the chain sprocket.
Guidelines for cleaning and storing the chain saw after use.
A table detailing common problems, their causes, and remedies.
Details the general conditions, duration, and exclusions of the product warranty.
Instructions for requesting parts, products, and contacting customer service.
Crucial instructions operators must read before using the equipment.
Understanding the machine's functions and its designated purpose.
Lists hazardous uses and their consequences.
Guidelines for safe work areas, electrical precautions, and operator safety.
Proper techniques for using, maintaining, and storing the power tool.
Information on obtaining professional service for the tool.
Essential safety measures to prevent injury during chain saw use.
Explains kickback and provides precautions to prevent it.
Safety measures for using batteries and chargers to prevent hazards.
Guidelines for battery handling, storage, and optimal performance.
Details on charger connection, usage, and safe charging practices.
How to protect the tool, battery, and charger from environmental factors.
Visual guide to the parts and controls of the cordless chain saw.
Lists items in the box and initial inspection procedures.
Step-by-step instructions for mounting the guide bar and chain.
Essential checks to perform before starting the chain saw.
Steps to adjust and check the chain tension for optimal performance.
How to test the chain brake to ensure it operates correctly.
Guidance on selecting and using chain lubricant for effective operation.
How to check the battery charge level using the indicator lights.
Step-by-step instructions on how to charge the battery pack.
Guidance on when to charge the lithium-ion battery pack.
Instructions for starting the cordless chain saw.
Procedures for safely stopping the chain saw.
General advice for safe and responsible operation of the chain saw.
Procedures for checking chain tension and oil delivery during operation.
Guides for felling trees, limbing branches, and bucking logs.
Steps to take after finishing work with the chain saw.
How to ensure proper motor cooling and check chain tension.
Procedures for checking the chain brake and tightening nuts/screws.
Detailed steps for sharpening the chain saw chain.
Steps for cleaning, greasing, and replacing the guide bar.
How to check and replace the chain sprocket.
Guidelines for cleaning and storing the chain saw after use.
A table detailing common problems, their causes, and remedies.
Details the general conditions, duration, and exclusions of the product warranty.
Instructions for requesting parts, products, and contacting customer service.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Battery Voltage | 40V |
| Bar Length | 16 inches |
| Weight (without battery) | 6.6 lbs |
| Motor | Brushless |
| Automatic Oiling | Yes |
| Tool-less Chain Tensioning | Yes |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 in |
| Chain Type | Oregon |
| Safety Features | Hand guard |
| Oil Tank Capacity | 4.1 fl oz (120 ml) |
