sunjoe TRJ13STE - Operation; Auxiliary Handle Adjustment

7
2. While lightly spreading the edger guide + ower guard, t
the curved ends into the small holes on both sides of the
motor housing, and release (Figs. 5 & 6).
3. The edger guide + ower guard can be ipped up so it
stores against the motor housing for convenient storage,
when not in use (Fig. 7).
Operation
Auxiliary Handle Adjustment
NOTE: For maximum comfort and control, adjust the auxiliary
handle to t your height. Shorter users adjust the auxiliary
handle to a lower position (away from your body). Taller users
adjust the auxiliary handle to an upper position (towards to
your body). Make sure your forearm is straight when using the
machine.
1. Loosen the auxiliary handle by turning the handle knob
counterclockwise (Fig. 8).
2. Adjust the auxiliary handle to a comfortable working
position (Fig. 9).
Fig. 5
Curved ends of
edger guide +
ower guard
Small hole on the
housing
RIGHT SIDE VIEW
Fig. 6
Curved ends of
edger guide +
ower guard
Small hole on the
housing
LEFT SIDE VIEW
Fig. 7
Handle knob
Fig. 8
Auxiliary handle
Fig. 9