Need help?Do you have a question about the Sunlux XL-2300 and is the answer not in the manual?
General| Brand | Sunlux |
|---|---|
| Model | XL-2300 |
| Category | Barcode Reader |
| Language | English |
Describes the plug-and-play installation for USB devices, virtual COM ports, and physical serial ports, including power requirements.
Explains the automatic powering on of the scanner after connection and basic decoding activation methods.
Details two methods for setup: scanning a single barcode for configuration or setting parameters using a sequence of barcodes.
Covers interface options like RS232, USB-KB, and USB Virtual COM for connecting the scanner.
Explains different scanning modes available for the device, such as Manual, Sense, and Continuous.
Details the sensitivity settings (Low, Medium, High) that affect the scanner's reading performance.
Lists various language settings supported by the scanner, corresponding to different keyboard layouts.
Configures the scanner's behavior regarding the Caps Lock key, allowing it to be locked or remain unchanged.
Enables or disables the Number Lock function, affecting the numeric keypad input.
Allows enabling or disabling a prompt tone for non-visual characters, indicating their presence in the data.
Sets a delay between characters for systems with slower processing speeds, improving data integrity.
Simulates ASCII mode for keyboard data sending, unaffected by keyboard layout.
Controls the Shift Lock function, managing how the shift key affects character input.
Details serial port configurations, including Baud rate, Parity, Stop bits, Data bits, and Control flow.
Lists various baud rates (e.g., 1200 bps to 115200 bps) for serial communication settings.
Configures the parity setting for serial communication (NoneEven, Odd).
Sets the number of stop bits (1 Bit, 2 Bit) for serial data transmission.
Defines the number of data bits (7 Bit, 8 Bit) used in serial communication.
Configures the control flow (Off, On) for serial port communication.
Covers data editing functions like Prefix/Suffix settings, Convert Case, and AIM Function.
Configures custom prefixes, suffixes, and terminating characters for scanned data.
Allows converting scanned data to uppercase, lowercase, or no conversion.
Enables or disables the AIM (Application Identifier) function for barcode data.
Manages sound indicators, including Starting-up indicator and Decode indicator settings (On/Off, volume).
Controls the decode indicator's status (On/Off) and its volume level (High, Medium, Low).
Selects the type of decode indication (Type1, Type2, Type3) for visual or audible feedback.
Covers advanced settings like Illumination, Aiming, Scan Delay, and Anti-color code read.
Configures the illumination mode: AlwaysOn, Flashing, or Off.
Sets the aiming mode for the scanner: Always On or Flashing Off.
Configures scan delay for different or same barcodes to prevent multiple scans.
Sets a delay for repeated scans of the same barcode (Off, On, Parameter Setting).
Configures reading behavior for barcodes with different colors (Black Code, Anti-color Code, Both).
Settings for Code 128 barcodes, including enable/disable, minimum/maximum length, and check digit options.
Configuration for EAN-8 barcodes, covering transmit check digits, conversions, and add-on codes.
Settings for EAN13 barcodes, including ISBN options, transmit check digits, and add-on codes.
Configuration options for UPC-E barcodes, such as check digits and add-on codes.
Settings for UPC-A barcodes, including check digit transmission and system character options.
Configuration for Interleaved 25 barcodes, including enable/disable, length settings, and check digit options.
Settings for MATRIX 25 barcodes, including enable/disable and length configurations.
Settings for CODE 39 barcodes, covering enable/disable, length limits, check digits, and start/stop characters.
Configuration for CODE 32 barcodes, including prefix, check digit, and start/stop characters.
Settings for CODABAR barcodes, including enable/disable, length, check digits, and start/stop characters.
Configuration for CODE 93 barcodes, including enable/disable, length settings, and check digits.
Settings for RSS barcodes, including enable/disable and character transmission options.
Configuration for Industrial 25 barcodes, including enable/disable and length settings.
Settings for Standard 25 barcodes, including enable/disable, length, and check digit options.
Configuration for Plessey barcodes, including enable/disable, length settings, and check digits.
Settings for MSI barcodes, including enable/disable, length, check digits, and MOD options.
Configuration for QR barcodes, including enable/disable, length settings, and read modes.
Settings for PDF 417 barcodes, including enable/disable, length, and read modes.
Configuration for Data Matrix (DM) barcodes, including enable/disable, length, and read modes.
To Next Page
