EasyManua.ls Logo

Sunnydaze Decor RIPPLING TOWER User Manual

Sunnydaze Decor RIPPLING TOWER
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MZ14070GA Page 1 / 2
ASSEMBLY
1. Locate the water tube on the underside of the fountain body and rmly attach the pump.
2. Run the pump and the light power cords through the tube located inside the basin. Make sure the power cords are
beneath the groove on the bottom of the basin to prevent damage once the fountain is lled with water.
3. Place the leak guard over the tube inside the fountain basin, ensuring the power cords are within the groove of the
leak guard.
4. Gently place the fountain body onto the basin.
5. Connect the pump cord to the transformer.
6. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 2.5 gallons.
7. Plug the power cords into properly grounded GFCI outlets.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1/2021
Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
You may need to add more water as the pump begins to circulate water through the fountain.
RIPPLING TOWER
OUTDOOR WATER FOUNTAIN
SSS-183
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
Select a smooth, level surface to place the fountain.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
 
Fountain Body 1
Basin 1
Electric Submersible Pump 1
AC Adapter 1
Leak Guard 1
NOTE:
The water tubing is built into the fountain
body. Take care when handling the water tube;
detaching the water tube from the fountain will
damage the fountain and void the product warranty.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Question and Answer IconNeed help?

Do you have a question about the Sunnydaze Decor RIPPLING TOWER and is the answer not in the manual?

Sunnydaze Decor RIPPLING TOWER Specifications

General IconGeneral
BrandSunnydaze Decor
ModelRIPPLING TOWER
CategoryOutdoor Fountain
LanguageEnglish

Summary

Assembly Instructions

Attach Pump and Route Cords

Connect the pump to the fountain body and run power cords through the basin's internal tube.

Position Leak Guard and Body

Place the leak guard over the basin tube and gently set the fountain body onto the basin.

Final Connections and Filling

Connect pump to transformer, fill basin with water, and plug into GFCI outlets.

Troubleshooting Common Issues

Water Flow Problems

Check pump submersion, air in pump, tubing kinks, or flow control adjustments.

Light or Connection Issues

Ensure cables are fully connected, seals are tight, and connectors are dry.

Important Usage and Care

Water Level and Type

Maintain water level for pump submersion; use distilled water and avoid chlorinated water.

Cleaning and Maintenance

Periodically change water, clean scale; avoid abrasive materials or pressure washers.

Seasonal Storage and Safety

Drain and store indoors during freezing weather; shut off power before cleaning.

Related product manuals