Sunnydaze Decor TURTLE TRIO User Manual

09/2019F12403 Page 1 / 2
TURTLE TRIO
OUTDOOR WATER FOUNTAIN
LZH-178
Read the assembly instructions carefully and follow the care instructions.
Keep these instructions for future reference.
Select a smooth, level surface to place the fountain. Assemble components of this

 
Turtle Trio Topper 1
Basin Bowl 1
Pedestal 1
Electric Submersible Pump 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@sere nityhealth.com, or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packaging.
ASSEMBLY
STEP 1:
Align the tabs on the bottom of the basin bowl with the notches in the
top of the pedestal. Place the basin bowl onto the pedestal, twist to
lock them together.
STEP 2:
Run the pump power cable through the basin bowl and pedestal,
leaving enough slack to allow the pump to touch the bottom of the
basin bowl.
Pull the cord out through the groove on the back-side of the pedestal.

Sunnydaze Decor TURTLE TRIO Specifications

General

Material	Polyresin
Power	Electric
Pump Included	Yes
Color	Green
Use	Outdoor

Summary

Fountain Assembly Instructions

Step 1: Connect Basin Bowl to Pedestal

Align tabs on the basin bowl bottom with notches on the pedestal top. Place bowl onto pedestal and twist to lock.

Step 2: Route Pump Power Cable

Run pump cable through basin bowl and pedestal, leaving slack. Pull cord through the groove on the pedestal's back.

Step 3: Connect Pump to Topper Tube

Firmly connect the pump to the topper's built-in tube. Ensure a snug fit. Place pump in basin bowl, not floating.

Step 4: Attach Topper and Fill

Align topper notches with bowl tabs, twist to lock. Ensure pump stays on basin bottom. Fill with water to submerge pump.

Fountain Use and Care

General Use Guidelines

For outdoor use; adjust pump flow if splashing is excessive. Keep pump submerged; use distilled water to prevent mineral buildup.

Maintenance and Precautions

Periodically change water, remove scale. Do not use bleach, abrasives, or pressure washers. Shut off power before cleaning.

Winter Storage

During freezing weather, drain fountain, disconnect pump, and store indoors to prevent cracking.

Fountain Troubleshooting

Water Flow Issues

Check pump submersion, power outlet, and tubing for obstructions. Adjust pump flow control.

Pump Air Lock

If water flow is delayed, unplug the pump briefly, then plug it back in to clear trapped air.