Sunnydaze Decor SSS-765

To Next Page

CONTEMPORARY CURVES RESIN OUTDOOR

WATER FOUNTAIN WITH LED LIGHTS

SSS-765

Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.

Select a smooth, level surface to place the fountain.



MZ14134GB Page 1 / 2

 

Fountain 1

Electric Submersible Pump 1

AC Adapter 1

Access Panel Cover 1

ASSEMBLY

1. Locate the water tube inside the back of the fountain and rmly

connect it to the electric submersible pump.

2. Locate the light cable inside the back of the fountain and rmly connect it to the shorter cable on the pump.

3. Place the pump inside the fountain and install the access panel cover.

4. Firmly connect the pump power cable to the AC adapter.

5. Fill the fountain with enough water to keep the pump fully submerged during operation.

6. Plug the power cord into a properly grounded GFCI outlet.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

1/2021

Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.

You may need to add more water as the pump begins to circulate water through the fountain.

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

NOTE:

The water tubing is built into the fountain.

Take care when handling the water tube; detaching

the water tube from the fountain will damage the

fountain and void the product warranty.

Need help?

Do you have a question about the Sunnydaze Decor SSS-765 and is the answer not in the manual?

Summary

Assembly Instructions

Connect Pump and Light

Connect the water tube to the electric submersible pump and the light cable to the pump.

Position Pump and Secure Cover

Place the pump inside the fountain and install the access panel cover.

Connect Power and Fill

Connect the pump power cable to the AC adapter and fill the fountain with water.

Plug In and Initial Operation

Plug the power cord into a GFCI outlet and allow time for air to escape.

Troubleshooting

Water Flow Issues

Address problems with water flow, including pump submersion, kinks, obstructions, and surface leveling.

Lighting and Power Issues

Troubleshoot non-working lights and ensure power outlet functionality.

Stability and Electrical Concerns

Ensure fountain stability on soft surfaces and consult electricians for electrical issues.

Important Information and Care

Usage Guidelines

Notes on outdoor use, splashing, water levels, and acceptable water types.

Maintenance and Cleaning

Instructions for periodic water changes, cleaning, and avoiding abrasive materials.

Winterization and Durability

Guidance on preparing the fountain for freezing weather and understanding finish aging.

This document describes the Contemporary Curves Resin Outdoor Water Fountain with LED Lights (SSS-765) from Sunnydaze Decor. It serves as an assembly guide, usage manual, and troubleshooting reference for the product.

Function Description

The SSS-765 is an outdoor water fountain designed to add aesthetic appeal and the soothing sound of flowing water to outdoor spaces. It features a contemporary design with curved resin elements and integrated LED lights, enhancing its visual appeal, especially during the evening. The fountain operates by circulating water using an electric submersible pump, creating a continuous flow. The LED lights illuminate the water flow and the fountain structure, providing ambient lighting.

Important Technical Specifications

The manual does not explicitly list detailed technical specifications such as pump flow rate, power consumption, or material composition beyond "resin." However, it implies the following components are included and essential for its operation:

Fountain Body: The main resin structure with integrated water tubing and light cable.
Electric Submersible Pump: Responsible for circulating water. It has a flow control mechanism.
AC Adapter: Converts household electricity to the appropriate voltage for the pump.
Access Panel Cover: Conceals the pump and internal connections within the fountain.
LED Lights: Integrated into the fountain, connected via a light cable to the pump's shorter cable.
Power Source: Requires a properly grounded GFCI outlet for safe operation.

Usage Features

Assembly:

Preparation: Select a smooth, level surface for placement and assemble components on a soft, clean surface to prevent scratches.
Pump Connection: Locate the water tube inside the back of the fountain and firmly connect it to the electric submersible pump.
Light Connection: Connect the light cable (inside the back of the fountain) to the shorter cable on the pump.
Pump Placement: Place the pump inside the fountain.
Access Panel: Install the access panel cover.
Power Connection: Firmly connect the pump power cable to the AC adapter.
Water Filling: Fill the fountain with enough water to fully submerge the pump during operation.
Power On: Plug the power cord into a properly grounded GFCI outlet.

Initial Operation:

When first used, air may be trapped in the pump, which can take several minutes to escape, allowing water to flow.
Additional water may be needed as the pump begins to circulate water.

Troubleshooting:

No Water Flow:
- Ensure the pump is fully submerged; add water if necessary.
- Unplug and replug the power supply for a few moments to release trapped air.
- Check tubing for kinks or obstructions.
- Check the pump for obstructions.
Splashing Water: Adjust the flow control on the pump body.
Uneven Water Flow:
- Ensure the fountain is on a smooth, level surface.
- Moisten the rippled front surface to help water flow more evenly.
Lights Not Working:
- Ensure cables are fully connected and seals are adequately tightened (do not overtighten).
- Ensure connector ends are completely dry before connecting.
Unbalanced Fountain: If on soft surfaces, use a large stepping stone or paving stone (not included) underneath for stability.
No Power: Check if the power outlet is working; consult a certified electrician if in doubt.

Important Usage Notes:

For outdoor use only.
Some splashing is normal; adjust pump flow if excessive.
Always keep the pump fully submerged; running dry will burn out the motor.
Use only water in the fountain. Distilled water is recommended to prevent mineral buildup, but not required. Avoid heavily chlorinated water.
The water tubing is built into the fountain; detaching it will damage the fountain and void the warranty.
The finish may gradually mellow in color from sun exposure over time, which is a natural aging process and not a defect.

Maintenance Features

Regular Maintenance:

Water Changes: Periodically change the water to keep the fountain and pump clean.
Scale and Buildup Removal: Regularly remove scale and buildup.
Pump Handling: Handle the pump by its body, never by the power cord.
Power Off: Always shut off the power supply before cleaning and maintaining the fountain and pump.

Cleaning Restrictions:

DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use abrasive materials to scrub the fountain or pump.
DO NOT use a pressure washer to clean the fountain.

Winterization:

During freezing weather, drain the fountain completely.
Disconnect the pump and store it indoors.
Allowing ice to form can damage the fountain (cracking), pump, and lighting.

Warranty:

Sunnydaze Decor offers a 1-year warranty for replacement parts or products at their discretion.
Proof of purchase (with date) and photos of the defect are required.
Warranty registration is available online at https://tiny.cc/SunnydazeWarranty.
Any modification to the product or failure to follow recommended care will void the product warranty.