Sunrain BYC-021TF1 - Accessories

- 5 -
1. Accessories
Each unit produced by our factory comes with the following accessories:
No.
Name
Qty.
Use
1
Installation & Operation Manual
1 PC
User Guide to install the unit
2
Wire controller
1 PC
Used for the machine operation interface
3
Drain-pipe
1 PC
Used for draining the condensate water
4
Drain-pipe connector
1 PC
To connect the drain pipe to the heat pump
5
Rubber shock absorber
4 PCS
To reduce vibration and noise
6
Heat pump unit
1 SET
For heating water
In order for the system to work the following parts are required
No.
Name
Qty.
use
1
Water pump
1
To circulate the pool water
2
Filter system
1
To clean the pool water which passes through
the heat pumps
3
Water pipes system
1
To connect the equipment and circulate the
water in the pool
NOTE
The types and quantity of the water pipes, valves, filter equipment, sterilizing equipment used for the swimming
pool heating/circulation pipe system, depend on the project design. We do not recommend to install auxiliary
electric heaters in the system.