9
2
INSTALLATION
Warning
▶ The machine must be installed by a trained technician only.
▶ Any electrical wiring must be performed by a qualified technician or agent.
▶ The machine weighs over 35 kg. As such, two or more people should carry out the installation.
▶ Plug in only after the installation is complete. If the operator mistakenly steps down on the pedal
with the plug in, the machine will start automatically and can cause physical injuries.
▶ Connect the ground (earth) wire. An unstable connection may result in an electric shock or a
malfunction.
▶ Place the belt cover on top of the machine
▶ Use both hands when bending the machine backward or returning it to the normal position.
Using only one hand can lead to severe hand injuries due to the weight of the machine.
1) Installation of the oil fan
Fix the oil fan ① onto the table with six screws ②. Use screws
④ to mount the head support rubbers ③ onto four corners of the
table. Insert the oil drain ⑤ into the oil fan ①.
[ Figure 1 ]
④
③
①
⑤
30
25
②
To Next Page
Loading...
