SunStar KM-757 - 2) Servo motor; 3) 470 motor; 4) 470 motor controller; 5) Clutch motor (for non-trimming type)

UsageModelOptional device
9
6) Peripheral automation devices (optional)
(S : Servo motor E : 470 motor)
AUTO KNEE LIFTING SYSTEM
PRODUCTION COUNTER
MATERIAL EDGE SENSOR
SCOUN-1
SEDG-1
SEDG-2
A counting device which indicates the completed quantity on the program unit
panel, including added, subtracted, corrected or remaining quantity along with
other performance rates.
A device that senses the edge or thickness of the sewing material to stop the
machine without manual pedaling. Available in two types: SEDG-1 for edge
sensing type and SEDG-2 for thickness sensing type.
SPF-4
A solenoid operating structure where the presser foot gets lifted automatically
with pedal reverse gear stage 1 operation.
3) 470 motor
MODEL
PM470
PHASE
1 : 1 󳤡
1 : 1 󳤡
3 : 3 󳤡
3 : 3 󳤡
1 : 1 󳤡
3 : 3 󳤡
HERTZ
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
VOLT
1 : 110V
2 : 220V
3 : 380V
4 : 110V / 220V
5 : 220V / 380V
PM470 󳣑󳣑󳣑
4) 470 motor controller
MODEL
PC470
VOLT
1 : 110V
2 : 220V
B 001
2) Servo motor
MODEL
SC55-1B
SC55-2B
SC55-3B
VOLT
1 phase 110V
1 phase 220V
3 phase 220V
WATT
550W
550W
550W
HERTZ
50/60 Hz
50/60 Hz
50/60 Hz
5) Clutch motor (for non-trimming type)
MODEL
HEC-1701
HEC-1703
HEC-1705
HEC-1706
1 phase 220V
3 phase 220V/380V
3 phase 220V
1 phase 220V
250W
250W
400W
400W
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
PC470 󳣑 B 001