14
5) Operating After Reading the Patterns from USB flash drive
A. Insert the USB flash drive stored sewing
patterns into the terminal.
B. After pressing NO key, input the pattern
number by using digit keys. (If you want to
work with “001”pattern, press [0][0][1])
C. Press ENTER key. Read the pattern and
change to sewing available mode.
D. At the moment, the upper thread plate comes
to descend, then ascend again after moving to
the sewing start point. The READY LED
comes to light on.
E.
Press SPEED key and adjust the speed properly.
F. If you step on the pedal switch on the right
side, the upper feed plate comes to descend, and
if you step on the pedal switch on the left side,
the machine starts relevant work.
G. When you finish operating, the machine backs to
the origin or sewing start point, and the upper
feed plate comes to ascend.
6) Confirming the Working Pattern Read from the USB flash drive
A. Insert a USB flash drive into the terminal.
B.
After pressing NO key, input the pattern number
by using digit keys. (If you want to work with
“001”pattern, press [0][0][1])
C. Press ENTER key. Read the pattern and
change to sewing available mode.
D. At the moment, the upper thread plate comes
to descend, then ascend again after moving to
the sewing start point. The READY LED
comes to light on.
E.
Press SPEED key and adjust the speed properly.
F. If you step on the pedal switch on the right
side, the upper feed plate comes to descend.
G.
If you press FORW and BACK keys to progress
and reverse 1 stitch, you can confirm the real
shape to be sewn. If you press continuously, it
moves to the start or to the end of pattern
data consecutively.
H.
If you want to finish working, press ORIGIN key.
I. If you want to continue sewing at the forward
or backward point, step on the left pedal switch.
J. When you finish operating, the machine backs to
the origin or sewing start point, and the upper
feed plate comes to ascend.
NO:001 NOR_SEW
XS:100%
YS:100% SP:2000
BC:000 PC:0000
NO:001 NOR_SEW
XS:100%
YS:100% SP:1500
BC:000 PC:0000
NO:001 NOR_SEW
XS:100%
YS:100% SP:2000
BC:000 PC:0000
NO:001 NOR_SEW
XS:100%
YS:100% SP:1500
BC:000 PC:0000
※ Caution : If READY LED turns on or upper feed plate is under, some keys are not available.
It happened, operate the keys after lifting the upper feed plate or pressing ENTER key.
To Next Page
Loading...
Need help?
General
