EasyManuals Logo

SunStar SPS/A-Pattern Series User Manual

SunStar SPS/A-Pattern Series
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
7) When a Machine Stops Operating During Sewing by the Thread Cut
A.
You can get the screen like a figure on the right side.
B. If you want to sew continuously at the same
position, insert thread again, then step on the
left pedal switch. If you want to sew at the 1
stitch forward or backward point, after moving
by using FORW and BACK key and step on
the left pedal switch.
C. If you want to stop operation and restart
sewing from the beginning, press ORIGIN key.
The feed plate moves to the origin or sewing
start point and ascend.
D. When you finish operating, the machine backs to
the origin or sewing start point, and the upper
feed plate comes to ascend.
8) Emergency Stop During Operation
A. The machine stops operating immediately by
pressing EMERGENCY STOP switch during
sewing. Then you can get the screen like a figure
on the right side.
B.
If you want to restart sewing from the beginning
after discontinuing it, Press the EMERGENCY
STOP switch once more to perform trimming.
(When manual trimming is set after emergency
stop) then press ORIGIN key. The feed plate
moves to origin then comes to ascend.
C. If you want to continue sewing, step on the left
pedal switch. If you finish every working, a
needle moves to origin and the upper feed plate
ascends.
Err18
Thread Broken!
NO:001 NOR_SEW
XS:100%
YS:100% SP:2000
BC:000 PC:0000
Err17
Emergency Stop!
NO:001 NOR_SEW
XS:100%
YS:100% SP:2000
BC:000 PC:0000
9) Winding the Thread
A. Inset the empty bobbin into a head of the
sewing machine.
B. Press MODE key.
C. Move to “3. Bobbin Wind” by using direction
keys , then press ENTER key. At this
time, the upper feed plate comes to descend.
D. If you step on the left pedal switch, thread
winding starts to progress, and if you step on
the left pedal switch one more time, thread
winding comes to discontinue temporarily.
E. If you finish the thread winding work, complete
the thread winding with the left pedal switch
or ESC key.
<< Main Menu >>
3. Bobbin Wind
4. Machine Test
5. Pattern List
<<Bobbin Wind>>

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SunStar SPS/A-Pattern Series and is the answer not in the manual?

SunStar SPS/A-Pattern Series Specifications

General IconGeneral
BrandSunStar
ModelSPS/A-Pattern Series
CategorySewing Machine
LanguageEnglish

Related product manuals