SunStar SPS/A-Pattern Series - EMERGENCY RECOVERY; Flash Memory Recovery Procedures

181
EMERGENCY RECOVERY
1) Emergency Recovery When Problems Occur in Flash Memory
1-1) When the Flash Memory (D:\> Drive) is not recognized
Flash Memory Formatting is
conducted automatically
When formatting is completed,
turn the power off and then
turn it on
Operating program updating Turn the power off and turn
it on again, after the
update is completed.
Power On
1-2) When Pattern0.exe is deleted in Flash Memory (D:\> Drive)
Power On
Internal Memory
Formatting...
Updating......
|
OK Screen
NO:123 NOR_SEW
XS:999%
YS:100% SP:15 0
BC:004 PC:9804
System Updated!
Power Off & On!
To Restart......
|
Power off & ON!
And then perform
Copy(1)...
Operating program updating Turn the power off and
turn it on again, after the
update is completed.
Updating......
|
OK Screen
NO:123 NOR_SEW
XS:999%
YS:100% SP:15 0
BC:004 PC:9804
System Updated!
Power Off & On!
To Restart......
|
77