SunStar SPS/A-Pattern Series - User Self-Restoration and Program Installation

182
2) User's emergency self-restoration and operating program installation
Follow the order as below.
Power On EXE Key
Turn the power on and press the
EXE" key of the Operation Box
at the same time. Then, the
screen as below appears.
User SetUp Mode
To Format. 0 Key
To UpDate. 1 Key
To Exit. ESC Key
Press 0"
User SetUp Mode
To Format. 0 Key
To UpDate. 1 Key
To Exit. ESC Key
Flash Memory Formatting...
Internal Memory
Formatting......
Turn the power off and
turn it on again after
formatting is completed.
Power Off & On!
And then perform
copy<1>...
|
2-1) Flash Memory Formatting
Press ESC"
User SetUp Mode
To Format. 0 Key
To UpDate. 1 Key
To Exit. ESC Key
OK Screen
NO:123 NOR_SEW
XS:999%
YS:100% SP:15 0
BC:004 PC:9804
2-3) Return to the initial program screen
Press 1"
User SetUp Mode
To Format. 0 Key
To UpDate. 1 Key
To Exit. ESC Key
Operating program
updating
Updating......
|
Turn the power off and
turn it on again, after the
update is completed.
System Updated!
Power Off & ON!
To Restart....
OK Screen
NO:123 NOR_SEW
XS:999%
YS:100% SP:15 0
BC:004 PC:9804
2-2) Program Updating