42
014:PTRN READ
NO :001
D. After pressing READ key, input the pattern
number to insert pattern by using digit key and
read in the pattern by pressing ENTER key.
(For example, input [0][0][1] to read the
pattern number 001.)
LINE
X:-0012A N:00032
Y:00000A
Function Code?
<Function Code>
047:LINE <
048:CURVE
049:CIRCLE
E. Go to the location of data to insert by using
FORW and BACK key.
F. Select LINE of operation box (OP) of the
function code to insert. After pressing CODE
key, if you know the function number related to
pattern programming, input three-figure digit
number and if you do not know the number,
press ENTER key. Then after selecting the
function number by using direction key ,
press ENTER key.
007:LINE
WIDTH:020[01.mm]
G. Input stitch width and press ENTER key.
007:LINE
X:-0203
Y:-0207
N:001
H. Insert data of the shape to insert by using
direction key. (Same as sewing data generation by
using LINE)
LINE
X:-0209A N:00071
Y:00000A
Function Code?
I. If you input data of the shape to insert each,
press EXE key.
J. Confirm if new pattern data was inserted
properly by using FORW and BACK key.
To Next Page
Loading...
