SunStar SPS/A-Pattern Series - Page 50

50
004:JUMP
X:-0150
Y:00300
N:001
JUMP NONE
X:-0150A N:00028
Y:00300A
Function Code?
SEC_ORG NONE
X:-0150A N:00029
Y:00300A
Function Code?
<Function Code>
CODE No : 001
004:JUMP
X:00000
Y:00280
N:001
D. After pressing JUMP key, move to the A point
by using direction key. Then press PNT SET key.
E. By pressing EXE key, the feed plate moves
according to the operated pattern data after
operating the pattern data.
F. After pressing CODE key, set up the second
origin by pressing [0][0][1] with digit keys.
G. Press ENTER key.
H. After pressing JUMP key, move to the sewing
start point P1 by using direction keys. Then press
PNT SET key.
I. By pressing EXE key, the feed plate moves
according to the operated data after operating the
pattern data.
JUMP NONE
X:00000A N:00042
Y:00280A
Function Code?