72
Sewing Start
SEWING_START
REFER_PNT
Sewing Start
Reference Point
Reference Point
New Sewing Start
New Sewing Start
C. After moving to “6. EMB Call”by using direction
key , press ENTER key.
<< Main Menu >>
6. EMB Call
<< Main Menu >>
0. Initialize
1. Parameter Set
2. Program
3-15) Embroidery Design Call Function
It means the function converting to sew by calling SunStar’s “.SST Sewing Design File”and TAJIMA’s
“.DST Sewing Design File”.
A. Insert the USB flash drive stored embroidery
designs into the USB terminal.
B. Press MODE key.
D. The next screen appears and READY LED
light of operation box flickers. Select TAJIMA
sewing design by pressing Number 1 key.
Insert Disk
SWF(0)/TAJIMA(1)
To Exit (ESC)...
E. The next screen appears again. (Current screen
can be difference according to sewing design in
the diskette.) After selecting the design to
convert by using direction key, press ENTER
key.
<< FILE LIST >>
G013.dst <
To Next Page
Loading...
