SunStar SPS/A-Pattern Series - Page 90

90
A. Insert a USB flash drive that you want to
make a copy.
B. Press MODE key.
C. By using direction keys , move to “2.
Program”menu, then press ENTER key.
At this time the upper feed plate descends, and
moves to the origin.
D. After pressing READ key, input the pattern
number that is to be copied by using digit keys.
(For example, to make a copy “001”, input [0]
[0][1].)
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
014:PTRN READ
NO :001
4-2) Making a Copy the Pattern to Another Number or Diskette
It is used to make a copy the pattern to another number or USB flash drive. It is available to check,
make a copy or delete the pattern number.
No. 1 USB
flash drive
No.001
No. 2 USB
flash drive
Make a copy the pattern to the
same USB flash drive as another
pattern number.
Make a copy the pattern to
another USB flash drive as same
pattern number or different one.
No.001
No.002
E. Press ENTER key. The READY LED flickers
during reading the pattern data.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?