SunStar SPS/A-Pattern Series - Page 89

89
A. Press MODE key.
B. By using direction keys , move to “5.
Program List”menu.
C. If you press ENTER key, the screen of the
right sides appears. To check the pattern
number in inner memory, press digit key, 0, and
to check the pattern number in a USB flash
drive, press digit key, 1
D. If you press digit key, 1. the pattern number
in a USB flash drive is shown.
E. If a pattern number is not indicated on one
screen, check it by using direction key , with
moving forward and downward.
<< Main Menu >>
5.Pattern List
6.EMB CALL
Memory(0)/USB(1)
To Exit(ESC)...
<<Pattern List>>
002 <-
003
004
4-1) Checking and Deleting the Pattern Number
It is used to check or delete the pattern number in USB flash drive and inner memory.
4) Pattern Data General Function
<<Pattern List>>
004 <-
005
006
F. After moving to the pattern number that you
want to delete by using direction keys , if
you press PTN DEL key, the screen of the
right side appears. To delete the pattern, press
ENTER key, and to cancel, press ESC key.
G. By pressing ESC key, complete the check of
pattern number. By pressing ESC key, back to
the initial screen.
Are YOU Sure?
Y(ENTER)/N(ESC)