92
F. The meaning of information being displayed on
the screen is as follows:
NO - Pattern number
XS - Extension/reduction rate of X-axis direction.
YS - Extension/reduction rate of Y-axis direction.
SP - Maximum sewing speed
RV - Whether to use a reversal device.
NONE (not use) YES (use)
ST - Total number of actually sewed stitches
G. If you press ESC key, return to previous state.
017:INFO DISP
NO:000 SP:2000
XS:100% RV:NONE
YS:100% ST:00100
4-4) Pattern Information Displaying Function
Upon punching, it displays various information on the pattern currently saved in the memory.
C. After moving to “2. Program” menu by using
direction key , press ENTER key. At this
time, the upper feed plate comes down and
moves to the original point.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
A. Insert USB flash drive containing the pattern to
use pattern information displaying function.
B. Press MODE key.
D. After pressing READ key, input the pattern
number to display pattern information by using
digit key and read in the pattern by pressing
ENTER key. (For example, input [0][0][1] to
read the pattern number 001.)
014:PTRN READ
NO :001
E. After pressing CODE key, if you know the
function number related to pattern programming,
input three-figure digit number 017 and if you
do not know the number, press ENTER key.
Then, after moving to “017:INFO DISP” by
using direction key , press ENTER key.
<Function Code>
017:INFO DISP<
018:CORD SIS
019:LINE ZIG
To Next Page
Loading...
